프로젝트 설명

ADAM 써멀마네킨(써멀마네킹)

Advanced Thermal Manikin (ADAM)

발한 써멀마네킨, 고급 써멀마네킨, 전신 마네킨, 의류시험 마네킨
Advanced Thermal Manikin, Full Body Manikin, Turn-Key Thermal Manikin

Product

고급 써멀마네킨은 세계에서 가장 진보된 써멀마네킨 시스템을 갖춘 장비입니다. 120개의 개별적인 Sweating zone으로 세분화 되어 있으며 차량 및 항공기 환경 시험에 적합하도록 설계되어 있습니다. 발한과 호흡이 인간과 매우 유사하며 환경변화에 신속하게 대응합니다.

제품특징

  • 고급 Sweating Zone
  • 각 영역별 높은 정확도의 서미스터 센서
  • 일반 서양 남성 신체 형태
  • 데이터 수집을 위한 고해상도 120 Zone
  • 무선 동작 가능
  • 내부 호흡 시스템 제공

Features

“ADAM” is the world’s most advanced thermal comfort manikin and represents a true leap in technology for thermal manikins. Developed for the Department of Energy’s National Renewable Energy Laboratory (NREL), “ADAM” can be used to evaluate the highly non-uniform and transient environments in vehicles and aircraft. “ADAM” is subdivided into 120 individual sweating zones for a highly accurate prediction of occupant sensation and comfort. The manikin mimics human responses such as sweating and breathing with incredible accuracy, and its high spatial resolution and rapid response to environmental changes allow it to respond realistically to transient, non-uniform inputs. “ADAM” has all electronics contained within the manikin body cavity, including batteries and a wireless transceiver for true cordless operation during thermal tests.

  • 50th percentile Western male.
  • 120 independent thermal zones with porous metal sweating skin and computerized fluid flow.
  • Ultra-stable resistance wire heating provides uniform heat flux.
  • Self-contained operation with internal batteries, RF data communication, and fluid reservoir.
  • Internal breathing mechanism inhales and exhales via manikin nose.
  • Real-time measurement of surface temperature and transient heat loss from each zone segment.
  • Microprocessor based controller at each zone regulates heating and fluid dispensing functions for quick response time.
  • Internal power regulation monitors battery condition and allows simultaneous operation and battery recharging.
  • Includes ThermDAC software.

Specifications

“ADAM” Manikin Size
• 50th percentile Western male
• Height: 5’9″ (175cm) Surface area: 19 sq/ft (1.8 sq/m)
• Base weight: 135 lbs (61 kg) Garment size: Medium
Call for a quote on custom sizes

Standard Specifications
• Porous metal sweating zones
• Carbon-fiber shell
• 120 independent thermal zones
• Zone heaters and sensors – installed
• Ultra-stable resistance wire heating
• Multiple high-accuracy thermistors per zone
• Simulated user-programmable work cycles
• Optional sweating copper skin sections with distribution pumps, reservoir, and tubing
• Pentium PC control computer and monitor
• Pre-installed ThermDAC control software
• Two ambient temperature sensors
• One relative humidity sensor
• Signal conditioning electronics
• Power and control cabling (standard, at hip or eyes)
• Operators manual
• One year warranty

Environmental
• 0°C to +70°C operating range
• 0 to 100% R.H. including condensation
• 500 W/m² maximum power output on batteries
• 800 W/m² maximum power output with power output with power cable attached

ThermDAC Control Software
ThermDAC was developed by Measurement Technology Northwest specifically for manikin and hotplate systems. It is a user-friendly, intuitive, Windows-based application providing full device control, fault detection, and data logging capabilities. System configuration and calibration can also be carried out within ThermDAC.

For manikin operation, ThermDAC includes the following special features:
• Color coded manikin pictorial displays, selectable for any manikin variable (temperature, heat flux, resistance, etc.)
• Automatic steady state detection
• User programmable work cycle simulation
• Instantaneous bar graph and time history line graph for any user selectable manikin variable
• Real-time calculation of test statistics over any user defined time interval
• Manikin control modes: temperature regulation, constant heat flux, and comfort equation.