프로젝트 설명

발 써멀마네킨(써멀마네킹)

Thermal Foot Test System

발 써멀마네킨, 신발 시험 써멀마네킨, 양말 시험 써멀마네킨
Thermal Foot Test System, Body Part Manikin, Thermal Manikin

Product

발 써멀마네킨은 모든 종류의 신발 또는 양말에 대한 테스트를 위해 개발되었습니다.
열의 손실을 정확히 분석하여 신발, 구두, 부츠 등의 디자인, 설계, 단열, 환기의 효과를 측정하여 정량화 할 수 있습니다.
온도 제어식 압축판을 이용해 인간의 체중에 따른 절연 층에 성능을 테스트 할 수 있으며 신발 밑창/중간창 부분을 압축하여 테스트 할 수 있습니다.
발목이나 발가락의 관절 및 굴곡은 신발을 쉽게 신을 수 있도록 설계되어 있습니다.
발 써멀마네킨은 표준 모델과 저사양 모델이 구분되어 있으며 Sweating 발 모델과 이동식 wicking 직물 피부와 computer-controlled 유체 계량 시스템을 포함하고 있습니다.

제품특징

  • 탄소 섬유/에폭시 복합 구조
  • 일반 성인 남성의 발 크기(US Size 9)
  • 12-zone(표준 모델)또는 6-zone(저사양 모델)의 독립적인 열 영역
  • 발목 관절 굴곡 약 25°하향 / 발가락 움직임 15°범위
  • 주변 조건에서 시험하기에 적합 -40°C ~+50°C
  • 이동식 wicking 직물 피부와 computer-controlled 유체 계량 시스템 포함
  • 가변 체중 분배와 최대 200파운드(90kg)의 단독 압축

ThermDAC 소프트웨어와 전용 컴퓨터로 전체 열 제어, 오류 검출 및 실시간 데이터를 받아 볼 수 있으며 데이터 로깅 상태를 유지합니다. 세트 포인트는 개별적으로 각 구역에서 조절할 수 있습니다.

Features

  • 50th percentile adult male foot (US size 9, Euro size 42).
  • Independent thermal zones with ultra-stable resistance wire heating for uniform heat flux.
  • Ankle and toe joints permit easy installation into even the most rigid footware.
  • System includes two ambient temperature sensors and one relative humidity sensor.
  • Optional sole compression system simulates human weight for realistic evaluation of sole/midsole insulation.
  • System includes a Dell PC laptop computer and exclusive ThermDAC control software. This intuitive, user-friendly, Windows-based application provides full thermal control, fault detection, system configuration and calibration, real-time data display, and data logging capabilities.

Specifications

Standard
• High-conductivity carbon epoxy shell
• 12-zone design for high data resolution
• Ultra-stable resistance wire heating
• Distributed wire sensors for each zone
• Optional removable fabric sweating skin system with distribution pumps, reservoir, and tubing
• Optional sole compression system with 0-200 pound (0-90kg) load capacity
• Dell PC laptop computer included
• Pre-installed ThermDAC control software
• Two ambient temperature sensors
• One relative humidity sensor
• Signal conditioning electronics
• Power and control cabling
• Operators manual
• One year warranty

Environmental
• -20°C to +50°C ambient range.
Manikin must be preheated before use in below-freezing conditions.
• 600 W/m² maximum power output
• 0 to 100% R.H. including condensation
• Sweating system: 0–1000 ml/hr

Performance
• ± 0.2°C temperature measurement
• ± 1% power measurement accuracy
• ± 3% relative humidity measurement

Thermal Foot Sizes
• 50th percentile foot, Western male
• Shoe size: US 9, Euro 42
Call for a quote on custom sizes

ThermDAC Control Software
ThermDAC was developed by Measurement Technology Northwest specifically for manikin and hotplate systems. It is a user-friendly, intuitive, Windows-based application providing full device control, fault detection, and data logging capabilities. System configuration and calibration can also be carried out within ThermDAC.

ThermDAC includes the following special features:
• Color coded manikin pictorial displays, selectable for any manikin variable (temperature, heat flux, resistance, etc.)
• Automatic steady state detection
• User programmable work cycle simulation
• Instantaneous bar graph and time history line graph for any user selectable manikin variable
• Real-time calculation of test statistics over any user defined time interval
• Manikin control modes: temperature regulation, constant heat flux, and comfort equation.